Every year it catches some beekeepers off guard. In June the hives are booming, supers are filling, and the bees are gentle enough to work in shorts. Then, sometime between late June and early August depending on where you live, the flow switches off. Foragers stand around at the entrance. Bees that were calm last week start head-butting your veil. A weak nuc at the end of the row gets robbed out in an afternoon. Nothing is wrong with the bees. They have hit the summer nectar dearth, and how you manage the next six to ten weeks has a lot to do with whether those colonies go into winter strong or limp into fall.

A dearth isn't a disaster. It's a normal part of the year, and you can plan for it. The beekeepers who struggle with it are usually the ones who don't notice it until it's already causing trouble.

What a Summer Dearth Actually Is

A nectar dearth is any stretch where available forage drops below what the colony needs to cover its daily consumption. In most of the temperate U.S. the big spring and early-summer flow comes from clovers, black locust, tulip poplar, basswood, and fruit bloom. When those finish and summer heat and dry weather set in, there can be weeks where almost nothing in bee range is producing nectar. Plenty of plants may still be in flower, but drought-stressed plants often secrete little or no nectar even while they bloom.

Timing depends heavily on region:

  • Southeast and Gulf states — dearth often starts in mid-to-late June and can run until goldenrod and aster in September.
  • Mid-Atlantic and Midwest — usually July through mid-August, with some relief from soybeans, sumac, or late clover in good years.
  • Northern states and Canada — often shorter and later, sometimes just two or three weeks in August.
  • Irrigated agricultural areas — can be patchy, with dearths broken up by crop bloom such as alfalfa, cotton, or sunflower.

The single best predictor of when your dearth will start is your own records from past seasons. If you logged when supers stopped gaining weight last year, you have a solid estimate for this year, give or take a week depending on rainfall.

Recognizing the Signs Early

A dearth announces itself in the bees' behavior well before you'd see it in the frames. Watch for these signals:

  • Entrance behavior changes — fewer foragers coming in with swollen abdomens, more bees hovering and investigating cracks and corners of the hive body.
  • Defensiveness jumps — the same colony that ignored you two weeks ago now follows you 30 yards from the apiary. Guard bees get more numerous and more alert when there's nothing coming in.
  • Supers stop progressing — foundation that was half-drawn stays half-drawn, and uncapped nectar may even shrink as bees consume it.
  • No fresh white wax — during a flow, new burr comb along the top bars is bright white. During a dearth, wax production practically stops.
  • The queen slows down — brood area shrinks noticeably, sometimes by 30–50% compared with peak spring.
  • Hive scales flatline or decline — if you run a scale hive, a daily net loss of 0.2–0.5 pounds over several days is the clearest sign there is.
The fastest dearth test I know: open a hive at midday and hold a frame of uncapped nectar flat. If drops rain out when you give it a shake, they're still bringing it in. If the cells are dry and only the capped stores remain, the flow is over.

Robbing Is the Biggest Immediate Threat

Once forage dries up, the strongest colonies in your yard turn their foragers on the easiest target around, and that's often your own weakest hive. A full-blown robbing frenzy can strip a nuc of every ounce of honey in a few hours, kill the queen, and spread mites and disease between colonies. Prevention matters far more than any response after the fact.

  1. Reduce entrances on every colony — strong hives can usually defend a 3–4 inch opening; nucs and weak colonies should be cut down to 1 inch or less. Robbing screens are even better for small colonies.
  2. Close upper entrances and gaps — check for warped boxes, notched inner covers, and cracks between supers. Robbers will find every one.
  3. Shorten your inspections — get in, check what you need, and close up. Fifteen minutes with the lid off during a dearth is an open invitation.
  4. Never spill syrup or leave comb exposed — a single drip of syrup on the landing board or a frame of honey left leaning against the hive can start a frenzy across the whole yard.
  5. Work weak hives last, or at dusk — foragers are less active late in the day, and fewer bees are out to notice an open box.
  6. Keep a wet towel handy — draping one over open boxes during inspections cuts down on scent and robber access.

If robbing does start, you'll see fighting at the entrance, bees grappling on the landing board, and a frantic, zigzagging cloud of flight in front of the box. Reduce the entrance to a single bee width at once, throw a wet sheet over the whole hive for a day, or move the victim colony to another yard at least three miles away if it keeps happening.

Water and Heat Management

A dearth almost always comes with heat, and in hot weather water becomes as important as nectar. A strong colony can haul in more than a quart of water a day to cool the brood nest by evaporation. If it can't find water nearby, it will spend foraging energy flying long distances, and it will show up wherever water is easiest to get, including your neighbor's pool, dog bowl, or livestock trough.

  • Provide a reliable source within 50–100 feet — a birdbath, a stock tank with floating wood or cork, or a bucket with gravel and pea stones gives bees a safe landing.
  • Start it before the dearth — bees fix on water sources early. Setting one up in July after they've found the neighbor's hot tub rarely wins them back.
  • Add a little scent — a slightly salty or mossy water source often attracts bees better than clean tap water.
  • Ventilate — propping the outer cover slightly or using a screened inner cover helps in very hot climates, but don't open an upper entrance on a weak hive during a dearth.
  • Use shade where you can — afternoon shade in the hottest regions cuts water demand and reduces bearding.

If you keep bees on a farm with livestock, watch how the bees and animals share water. Bees crowding the edges of a cattle or horse trough can make animals reluctant to drink, so a dedicated bee waterer placed between the apiary and the barn usually solves it. Folks who run livestock alongside their hives often track water infrastructure and pasture rotation in Barnsbook, which makes it easier to see where the bees' water needs overlap with the animals'.

Ready to put this into practice? Download HiveBook Free — it’s free and works offline.

To Feed or Not to Feed

This is where beekeepers disagree the most. Feeding during a dearth can keep a colony going, but it can also set off robbing and, if supers are still on, contaminate your honey crop. Here's a practical framework.

Don't feed if:

  • Honey supers are still on the hive and you plan to harvest them.
  • The colony has at least 2–3 full frames of capped honey in the brood boxes.
  • The colony is strong and the dearth is expected to last less than four weeks.

Do feed if:

  • It's a new package, nuc, or split from this season that hasn't built up stores.
  • A hefting test shows a single deep weighs dangerously light. Tip the back of the hive up an inch and compare it to your heavier colonies.
  • You see fewer than one frame of stores and the queen has almost stopped laying.
  • You want to keep a colony raising brood heading into fall to build winter bees, which matters most in regions with a weak fall flow.

When you do feed, use 1:1 sugar syrup by weight, and only use internal feeders: top feeders, frame feeders, or an inverted jar over the inner cover hole inside an empty box. Never use open feeding or entrance (Boardman) feeders during a dearth. They draw robbers like nothing else. Feed in the evening so the excitement settles overnight, and feed all colonies in a yard at the same time so no single hive smells like a jackpot.

Feeding one hive in a yard during a dearth is like leaving one car unlocked in a parking lot. Either feed everyone who needs it or take the needy colony somewhere else.

Pollen matters too. If you see little to no fresh pollen coming in and the brood frames have no bee bread rings around the brood, a pollen patty can help keep brood rearing going. In hot, humid regions, keep patties small, about a quarter pound at a time, because small hive beetles love unattended patties.

Dearth Is Prime Time for Mite Damage

This is the part many beekeepers miss. As the queen cuts back on laying during a dearth, the ratio of mites to bees goes up fast. Mite populations peaked with brood production all spring, and now there's less brood for them to reproduce in and fewer new bees to dilute the load. A colony carrying 2 mites per 100 bees in June can easily reach 5 or 6 per 100 by mid-August.

That timing matters because the bees being raised in late August and September are your winter bees. If they develop under heavy mite and virus pressure, they won't live long enough to carry the colony through to spring, no matter how much honey is in the box.

  • Run an alcohol wash or sugar roll on every colony as the main flow ends, and again 3–4 weeks later.
  • Treat when you hit 2–3% in late summer. Don't wait for 5%.
  • Pick a treatment that suits the heat — formic acid and thymol products have temperature limits (many shouldn't be used above about 85–92°F), so read the label and plan around the forecast. Oxalic acid works best when brood is minimal.
  • Pull honey supers first if your treatment requires it.

Logging mite counts by hive and date is the only way to see trends and compare treatment results from year to year. HiveBook lets you record wash results right at the hive, even in an out-yard with no cell signal, so you're not trying to remember numbers from three colonies ago when you get back to the truck.

Planning Forage to Shorten the Gap

You can't change the weather, but you can sometimes soften the dearth by adding forage that blooms in the gap. Within a 2–3 mile foraging radius, a single planting won't feed a colony, but larger plantings, or many small ones spread across a neighborhood, do make a difference.

  • Buckwheat — flowers about 4–6 weeks after sowing and yields nectar in the morning. Staggered sowings two weeks apart can cover most of a dearth.
  • Anise hyssop and catmint — long-blooming perennials that hold up in heat.
  • Sunflowers — a good pollen source in late summer, with variable nectar.
  • Partridge pea and sumac — native options that often bloom right in the gap in eastern regions.
  • Cover crops — crimson clover, phacelia, and sweet clover can be timed to fill gaps on farmland.

If you grow vegetables or run a market garden, the overlap works both ways: summer squash, cucumbers, and melons get better fruit set from bees, and flowering cover crops between plantings feed your colonies. Growers who plan succession plantings in CropsBook can schedule a buckwheat or phacelia strip into the bed rotation so something is blooming right when the bees need it most.

A quarter-acre of buckwheat won't make you a honey crop, but it can be the difference between a colony that holds steady through August and one that eats into its winter stores.

A Practical Dearth Checklist

When you notice the first signs that the flow is ending, run through this list over the next week:

  1. Decide whether to harvest now or leave supers on. Pulling them before a long dearth keeps bees from eating surplus and makes the hive easier to defend.
  2. Reduce entrances on every colony and fit robbing screens on nucs.
  3. Do a mite wash on every hive and log the results.
  4. Heft or weigh each colony and flag any that need feeding.
  5. Check that your water source is full and being used.
  6. Combine any colonies too weak to defend themselves. Two weak hives make one that can hold its entrance.
  7. Store pulled supers and drawn comb securely, away from wax moths and robbers.
  8. Write down the date the flow ended so next year's plan starts with real data.

That last step is easy to skip and costs you later. A few seasons of notes on when the flow ended, how heavy each hive was going into the dearth, and which colonies needed feeding will show you patterns no general guide can. HiveBook keeps those inspection notes, weights, and mite counts together by hive, so a quick look back at last July tells you what's likely coming this July.

The summer dearth tests a beekeeper's restraint more than their skill. The colonies mostly know what to do: they cut back brood, guard their stores, and wait. Your job is to avoid making things worse with open feeders, long inspections, or sloppy honey handling, while staying on top of the mite counts and water that quietly decide how the fall goes. Get through the gap with strong, well-defended, low-mite colonies, and the goldenrod and aster flow will do the rest of your winter preparation for you.